MARCH/APRIL 2009
836
BOARCH DIPLOMA EXAMINATION, (C-05)
DCME VI SEMESTER EXAMINATION
SOFTWARE ENGINEERING MARCH/APRIL 2010
PART-A 10*4=40
Instructions:
(1) Answer all questions and each question caries four marks. (2)
Answers should be brief and straight to t the point and shall not exceed
five simple sentences.
1. What do you understand by software crisis? Suggest solutions to overcome software crisis.
2. Write the responsibilities of a project manager.
3. What are activities of project planning?
4. Write the qualities of a good software engineer.
5. Mention the requirement problems with examples for each.
6. Write the examples of Bad SRS documents.
7. What the characteristics of a good software design?
8. Define: (a) Cohesion (b)Coupling.
9. What is verification and validation?
10. Distinguish between software Reliabilities and Hardware Reliabilities.
PART-B 5*12=60
Instructions: (1) Answer any five questions and each question caries twelve marks. (2) The Answers should be comprehensive and criteria for valuation is the Content but not the length of the answer.
11. Draw the functional block diagram of classical waterfall model and explain the various activities
12. (a) Distinguish
between LQC and function point metric. (b)What is a risk? List the
various types of risks and their containment methods.
13. (a)Explain about GANTT chart for scheduling. (b) Discuss about software configuration management
14. (a)
What are the characteristics of Good SRS document? Explain briefly. (b)
Explain the techniques used for representing complex logic.
15. (a) Distinguish between function oriented and object oriented design. (b) compare GUI and Text based Interfaces.
16. (a) Discuss about integration Testing approaches. (b)write about code review techniques.
17. Write about bugging approaches.
18. Define: (i)Alpha Testing (II)beta Testing (iii)acceptance testing.
19. (a) Explain why to get ISO 9000 certification for software products/Industry?
Distinguish between ISO 9000 and SEI CMM
836
BOARCH DIPLOMA EXAMINATION, (C-05)
OCTOBER/NOVERMBER-2010
DCME VI SEMESTER EXAMINATION
SOFTWARE ENGINEERING
TIME: 3 HOURS] TOTAL MARKS: 100
PART-A 10*4=40
Instructions:
(1) Answer all questions and each question caries four marks. (2)
Answers should be brief and straight to t the point and shall not exceed
five simple sentences.
- Write four notable changes in software development practices?
- What is Source code control system?
- What is project planning?
- Write about Gantt charts?
- What is a decision tree? Where it is used?
- How to identify functional requirements?
- What is coupling?
- Write the differences between mode based and modeless interface?
- What is difference between black-box and white-box testing?
- What is ISO 9000 Certification?
PART-B 5*12=60
Instructions:
(1) Answer any five questions and each question caries twelve marks.
(2) The Answers should be comprehensive and criteria for valuation is
the Content but not the length of the answer.
- Explain spiral model?
- Explain the following empirical estimation techniques: (a) expert judgement technique (b) Delphi cost estimation
- Explain about risk management?
- Explain about contents of the SRS document
- Explain about performance testing?
- Explain white-box testing?
- Explain about coding?
- (a) How to get ISO 9001 certification? (b) Compare between ISO 9000 certification and SEI/CMM?
BOARCH
DIPLOMA EXAMINATION, (C-05)
OCTOBER/NOVEMBER-2011
DCME
VI SEMESTER EXAMINATION
SOFTWARE
ENGINEERING
Time : 3 Hours] [Total Marks:
100
PART-A 10*4=40
Instructions: (1)
Answer all questions and each question caries three marks. (2) Answers should
be brief and straight to t the point and shall not exceed five simple
sentences.
1. Write about evolution of an art of Software engineering
discipline.
2.
List any three shortcomings of LOC metric
3.
Discuss technical risks.
4.
Explain briefly the configuration identification.
5.
Explain any three categories of users of the SRS document.
6.
List the contents of the SRS documents.
7.
Define cohesion and coupling
8.
List the characteristics of user interfaces.
9.
Write short notes on coding standards.
10. Write any two reasons
to get ISO 9000 Certification
PART-B
5*12=60
Instructions: (1)
Answer any five questions and each question caries ten marks. (2) The Answers
should be comprehensive and criteria for valuation is the Content but not the
length of the answer.
11. (a) Explain data
flow-oriented design with an example. (b)Discussion prototyping model with
appropriate diagram..
12. (a) write the
different items in the SPMP document. (b) explain the two popular empirical
estimation techniques.
13. (a)explain Gantt
chart with a neat sketch. (b) explain the two ways in which a software
development organization, as a whole, structured.
14. (a) Discuss
functional requirement with an example. (b) explain any four characteristics of
a good SRS document.
15. (a) Explain any
four classes of cohesion. (b)explain the features of a function-oriented
design.
16. (a) Explain any
two techniques of menu-based interface. (b) explain design of test cases with
an example.
17(a) Write about
white-box testing. (b)explain any three debugging approaches
18 (a) Define software
reliability. Give three reasons why it is difficult to measure software
reliability. (b) discuss any two maturity levels classified by SEI CMM.
BOARD OF DIPLOMA EXAMINATION, (C-05)
OCTOBER/NOVEMBER-2011
DCME VI SEMESTER EXAMINATION
SOFTWARE ENGINEERING
Time : 3 Hours] [Total Marks: 100
PART-A 10*4=40
Instructions: (1) Answer all questions and each question caries four marks. (2) Answers should be brief and straight to t the point and shall not exceed five simple sentences.
1. Explain the importance of software engineering.
2. Explain briefly about project planning activity.
3. Write configuration control activities.
4. Explain briefly about Delphi cost estimation
5. List the characteristics of good SRS document
6. Explain the importance of SRS.
7. Explain briefly about the software design approaches.
8. What are the advantages of a graphical interface?
9. Enumerate the list of errors checked during code inspection.
10. Write briefly about ISO 9000 certification.
PART-B 5*12=60
Instructions: (1) Answer any five questions and each question caries twelve marks. (2) The Answers should be comprehensive and criteria for valuation is the Content but not the length of the answer.
11. (a) explain the working of Spiral life cycle Model. (b) write the advantages and disadvantages of spiral life cycle model.
12. Explain about project scheduling activities.
13. Write short notes: (a) Risk Identification (b) Risk assessment (c) Risk Containment
14. (a) write briefly the contents of SRS document (b) write briefly about requirement gathering and analysis phase.
15. (a) State and explain the classification of cohesiveness with examples. (b) write the characteristics of good software design.
16. Explain the following user interface design: (i) command language – Based Interfaces. (ii) Menu-Based Interfaces. (iii) Direct manipulation Interfaces
17. Explain briefly: (a) Black Box Testing (b) White Box Testing.
18. Explain briefly: (a) Hardware Reliability (b) Software Reliability.
836
BOARCH DIPLOMA EXAMINATION, (C-05)
APRIL/MAY-2011
DCME VI SEMESTER EXAMINATION
SOFTWARE ENGINEERING
Time : 3 Hours] [Total Marks: 100
PART-A 10*4=40
Instructions: (1) Answer all questions and each question caries four marks. (2) Answers should be brief and straight to t the point and shall not exceed five simple sentences.
1. What is the solution to the software crisis?
2. Write four responsibilities of a project manager.
3. What is RCS?
4. What are the skills necessary for software project management?
5. Write four characteristics of a Good SRS documents.
6. What do you understand by traceability of requirements?
7. What is a good software design?
8. Write four characteristics of a good user interface.
9. What is testing?
10. What software reliability?
PART-B 5*12=60
Instructions: (1) Answer any five questions and each question caries twelve marks. (2) The Answers should be comprehensive and criteria for valuation is the Content but not the length of the answer.
11. Explain about classical waterfall model.
12. Explain the following metrics for project size estimation: (a)Lines Of Code. (b)function point metric.
13. What is scheduling? Explain the following charts: (a) GANTT charts (b) PERT charts.
14. Explain about requirement analysis and gathering.
15. Explain about different debugging approaches.
16. (a) Explain about error seeding. (b) Explain about system testing.
17. Explain about different testing methods.
19. Explain any six reliability metrics.
C05-CM-605
836
BOARD DIPLOMA
EXAMINATION, (C-05)
APRIL/MAY-2012
DCME VI
SEMESTER EXAMINATION
SOFTWARE
ENGINEERING
Time : 3
Hours]
[Total Marks: 80
PART-A 10*4=40
Instructions: (1) Answer all
questions and each question caries THREE marks. (2) Answers should be brief and
straight to t the point and shall not exceed five simple sentences.
1.
Write short notes on data
flow-oriented design.
2.
what are the activities involved in
project planning?
3.
What do you mean by SCCS and RCS?
4.
Write The Importance Of SPMP document
5.
List the contents of SRS document.
6.
What is Decision Tree in Complex
Logic?
7.
Distinguish between function
oriented and object oriented design
8.
What is verification and validation
9.
What is software testing?
10.
Differentiate software re-liabilities
and hardware re-liabilities
PART-B 5*10=50
Instructions: (1) Answer any five
questions and each question caries twelve marks. (2) The Answers should be
comprehensive and criteria for valuation is the Content but not the length of
the answer.
11. Explain spiral life cycle model with
neat diagram.
12.
(a) Explain PERT chart for scheduling. (b) Explain types of organisation structures.
13.
Write short notes on: (a) risk
management (b) software configuration management
14.
(a) What is a functional
requirement? Explain how to identify the functional requirements? (b) Explain
characteristics of SRS document.
15.
(a) Explain various user interface
models. (b) what is cohesion ? explain classification of cohesiveness.
16.
(a) Explain integration testing. (b) Write about coding guidelines
17.
(a) Explain various debugging
approaches. (b) Write short notes on: (i) alpha testing (ii) beta testing (iii)
acceptance testing.
18.
Explain about SEI capability
Maturity Model in detail
Hi, This is kavya from hyd, i want both questions and answers book let. Could you help me.
ReplyDeleteHi Kavya, As of now Java Questions and Answers have been Prepared. For more details myrajendra@gmail.com
DeleteThank you for this blog post it actually couldn't have come at a better time for me !!
ReplyDeleteCMMI Consulting
hi i want question & answers plz send me
ReplyDeletehussainirfan019@gmail.com
Really nice topics you had discussed above. I am much impressed. Thank you for providing this nice information here.
ReplyDeleteSoftware Testing Company
QA Services
PS4 Game Tester
Game Testing Services
Video Game Testing Companies
So far out of all the blogs, I personally feel this blog is just awesome Excellent goods from you about Game Testing Services, man. I’ve understand your stuff previous to and you’re just too excellent on Game Testing Companies. I actually like what you’ve acquired here, certainly like what you are stating and the way in which you say it. You make it enjoyable and you still take care of to keep it sensible content about Game Testing Services USA. I can not wait to read far more Video Game Testing Companies from you. This is actually a tremendous site..
ReplyDelete